Buying guide Health and Lifestyle Home Improvement Kitchen

Things To Know Before Buying An Under Sink Water Filter

Janice

If you are planning to buy an under sink water filter then there are several things that you need to be aware of. Like any filtration unit, an under-sink filter addresses some of the particular problems associated with filtration. Primarily the under sink filter helps you remove harmful chemicals, microbes and other particles.  These kinds of water filters can remove particles as small as 0.5 microns.  However, if you are willing to remove particles like sodium and chlorine from the water then other filtration processes like reverse osmosis need to be involved. It is advisable to run a water test at home before buying the water filter to get optimum results. 

Know the advantages before buying the under sink filter

It makes sense to be aware of the advantages of buying the under sink filter before making a deal. One of the major advantages of an under sink filter is the fact that it is hidden under the sink and takes a very small space. Under-sink filters can add up to the aesthetics of your kitchen once it is being installed. Once you have installed the water filter then naturally you will be availing clean and healthy water. The under-sink filter will turn your tap into a filter knob. The process of installing the filter is very easy as compared to the installation process of other filtering units. Another major advantage of this filter is that these filters run without electricity.  So there is no power consumption involved in the process of filtration. Alongside there are a huge variety of water filters available in the market.  You can buy a wall mount water filter if you want to add beauty to your kitchen. 

Be aware of the disadvantages of an under sink filter

Alongside knowing the advantages of buying an under sink filter it is also important to know the disadvantages.  This can help you get a clear idea of the product before you invest in it. One of the major disadvantages is that you may have to buy a knob that is to be attached to your pipeline of the tap as these kinds of knobs are not provided in the filtration unit. In circumstances of water leakages, the floor under the sink can become wet adding up to your hassles of cleaning. If the filter is not installed properly then the problems associated with the drainage of wastewater can be a major challenge. Some of these filters do not come with a TDS control.  A TDS control is a mechanism that helps in maintaining the necessary minerals in the water.  You have to check the availability of such a control unit so that you always get healthy and safe water. 

To sum up

Buying under sink filters is always a good deal as it provides you with safe drinking water in the most cost-effective way.  However, before buying the filter you need to be aware of the advantages and disadvantages of the same.  This article is an attempt to make you aware of the pros and cons of buying an under sink filter. 

Read More
Guide Kitchen Shopping Water Filter

Best Water Filter At An Affordable Price

Janice

What type of water filter is the best?

There is a wide range of water purifiers available in the market, it is really hard to decide which one is the best. To choose the best water filter you must be aware of the various filtration processes involved. But there is no need to go searching to find more info about the purifiers and processes we have made the work easy for you.

Below enlisted are the filtration processes used:

  • Sedimentation filtration

This process is used on a large scale all around the world for water treatment. This helps remove the sediments such as sand, dust, and other large particles suspended in the water.

The sediments are allowed to settle down on the surface by keeping the container at a fixed position. This process is ineffective in removing out the chemicals and contaminants that are smaller than 1 micron. Also, this process needs to be combined with other filtration processes to work effectively.

  • Activated carbon block filtration

The activated carbon block that is used in this filtration is composed of fine carbon powder which is held together by a binding agent. It is effective against the removal of chemicals, bad taste, odor, and other contaminants in the water.

The carbon block is also able to reduce contaminants such as lead, VOCs, and microscopic cysts. And is resistant against bacterial growth. The main reason why this process is effective is due to the larger surface area provided due to the high porosity powder form.

  • Granular activated carbon filtration

The granular activated carbon contains larger blocks as compared to the carbon block, and thus the rate of absorption is also low but the filtration rates are higher. This process is very similar to the activated carbon block filtration process for the removal of chlorine taste and odor. This can be used to protect the larger particles from entering the other filtration process.

This process is inexpensive and is a part of green technology as it doesn’t require a power supply as well as has no chemical additives. But the process is not so reliable and is used alone.

  • Reverse osmosis filtration

In this filtration, we use the semipermeable membrane to separate the inorganic contaminants, most of the contaminants can be removed from the water but are ineffective in separating the water-soluble compounds. It is one of the filters that deliver the strongest filtration against a majority of the contaminants.

Looking at the bad side, this process is quite slow and wastes 3:1 of the water. It can not be used alone to clean the chlorinated water. Also, it requires a water tank to store out the filtered water and is expensive enough.

  • Distillation

It is a traditional method of purifying the water. This is good for filtering the water but the results are slow and have so many loopholes in it. The cost for filtering and maintenance is very high as it consumes too much electricity and time.

  • Ion exchange

It is used for removing the undesirable dissolved ions from the water by replacing them with some other ions having the same electrical charge. This filtration is used for softening the water and deionization purposes such as acid absorption, metal removal, and demineralization. Click here to find more info regarding the process involved.

Read More
Accessories Kitchen

Things to consider while choosing a water pitcher or dispenser

Janice

When it comes to choosing a water filter pitcher several factors need to be considered. The ultimate goal of buying a pitcher or a dispenser is to get pure and tasty drinking water that is free from contamination. One of the best ways to buy a water filter pitcher is to know the available products in the market. zero water is one of the learning brands that has created a buzz in the market for premium products. Apart from this brand, there is Brita that also has top product lines available in the market. However, to make sure that you buy the best product it is important to evaluate a few essential aspects. 

Know the design of the product 

The design of the product is one of the most important characteristics that need to be considered when it comes to buying a water pitcher or a dispenser. The dispenser or the pitcher needs to be handy and light-weighted. If the body of the pitcher or the dispenser is heavy then it will be difficult to handle. Zero water has some of the best products in that it not only offers clean water but also is light weighted. Brita is another brand that is getting noticed by the customers for its sleek designed pitcher and dispenser. Who doesn’t like to have clean and odourless chilled water during the summers? The designs of the dispenser and the pitcher should be the one that fits your refrigerator. In case you want to keep it in your kitchen, the sleek design would also sit well in the corner of your kitchen. 

Know the size of your pitcher or dispenser 

The size of your pitcher or the dispenser is also a factor that needs to be considered when it comes to buying the right one. A standard size pitcher comes with a 10 cup sized reservoir. However, zero water also offers you an 8 cup sized reservoir to choose from. Brita has a range of pitchers with various Cup amounts. When it comes to a reservoir the standard side is a 23 cups reservoir. However, if you search the market you will also come across a few models with smaller sizes. Depending upon the size of your family and your daily water needs you can buy the right one. 

Consider the availability of the filter cartridge 

Many brands in the market sell pitchers or dispensers. However, in some cases, the availability of the filter cartridge is a major concern. The filter cartridge of a particular model may not fit the other. So when you buy a pitcher make sure that the brand has filter cartridges that fit all its models. Zero Water and Brita have filter cartridges that fit all their models. So make sure to go for a premium brand that will offer you the best price and flexibility of changing the cartridges when needed. Remember, that a single cartridge lasts on an average of 2 months. So when it comes to buying your pitcher or a dispenser you have to be judicious with your decision.

Read More